Sunday, November 8, 2009

Procrastination

I procrastinate, it's a guy thing, I'll get around to it, maybe later, I want to finish this first, hey what's that?! Okay, a little A.D.D. too, I don't know how anything gets done but it does...eventually. If it's really interesting it gets done as soon as I stumble across it while I am doing something else. I think of it as prioritizing.

I've been meaning to change tires myself since I had the shop change my front tire last spring. I babbled on about doing it myself and managed to put it off until the fall rains. My rear tire on my Triumph should have been changed a couple of thousand miles ago but as long as the roads were dry and I only used the outer edges of the tire I could ride through the summer.

I ordered a rear tire and went online to read up and watch YouTube videos on how to break the bead, remove the tire from the rim and place the new tire on. What a wealth of information that interweb is.

I was ready to save $20.

I built a bead breaker out some scrap angle iron and a wooden 2x2 I had laying around, then lag bolted it to a 4x6 arbor post outside.




But when I got the wheel off my bike I found my cush drive went ka-put and I had to order a new one.




Meh, I have Trobairitz's Ninja to ride in the meantime, this also gave me the rest of the week to remove the old tire and reinstall the new one. Those guys on the interweb videos make things look so easy, they didn't even break a sweat. I strained my milk just trying to break the bead and you wouldn't have wanted to see me wrestle the tire off and wrestle the new one on, it looked so much easier online, but I saved 20 bucks.

Now to set the bead, which turned out to be another adventure all in itself. Everything I've ever known, watched and heard about setting the bead on a tire had me anxiously waiting all the fanfare and revelry of the infamous bead pop. Thinking my little 100psi pancake compressor didn't have the volume to even think about filling a bicycle tire forget setting a bead onto a rim, I hauled the tire into work the next day in the car. I removed the valve core and filled the tire. That's it, the tire filled and held air. I was as disappointed as kid who dropped his ice cream cone in the sand. So I removed the valve core and dumped the air from the tire and tried again...nothing. I checked the tire against the rim, check, good, even, holding air, but set? I just wasn't sure, had this been a car tire I wouldn't have given it a second thought and mounted it. But this is a rear tire of a motorcycle and I could just picture the bead slipping while leaning hard into a turn. After hoping on a couple forums and asking the guys, evidently sometimes a tire will just silently and effortlessly slide right onto the rim.

Now with my bike on the jack I just had to wait for my new rubber damper to come in.




In the meantime I fashioned a wheel balancer from instructions I found online.

Oh boy, another project and the rest of the week to find parts. I had 2x4s kicking around from remodel projects, I just needed some bearings, bolts and some steel flat bar. Off to the store I went in search of supplies. After two days of searching I found bolts and bearings but yet to find any flat bar or angle iron. Evidently scrap steel is quite a commodity, but I eventually found some angle iron from a friend down the street.
I fashioned a stand from 2x4s and attached the brackets and balanced my wheel. Worked pretty darn slick.



I mounted the balancer to some leftover counter top we had from our kitchen remodel and used a bar clamp so I could adjust it for mounting the Ninja tires too.



And as far as setting the bead, my little 100psi pancake compressor set the bead on both the Ninja tires just fine...with all the fanfare and revelry I was expecting the first time.



I have now changed the rear tire on my Triumph and both tires on the Ninja and saved myself $60. Unfortunately, I have three tires in my backyard collecting water that I'll have to eventually recycle, but I'll get to that later.

Now where did I put...hey what's that?


-

Monday, November 2, 2009

How the Mighty Have Fallen...

The bigger they are, the harder they fall is not always necessarily true, at least if we as riders can help it.

Last Thursday I renewed my membership into the dropped bike club. I don’t know if it is the lesser of two evils, but thankfully I dropped the Ninja and not the Triumph. I hopped on the bike after work to go home, started it up, put it in gear and raised my right leg to the peg. Ouch, what the…my keys in my right pant pocket were stabbing me in the leg. It was quite uncomfortable to say the least, so I put the bike back into neutral and tried to adjust my keys with gloved hand through my riding gear. I stood up and tried again with out any luck. Damn, I’m just going to have to get off the bike, unzip my riding gear and go after the offending key. Anybody who has ridden motorcycles knows what happened next.

With my left foot close to the bike and me leaning, leaning…uh oh…past the point of where the kickstand “should” have been, I couldn’t save it and she went down as I stepped out of the way. Crap, well at least the tank was near empty, saving me from lifting close to an extra 40 pounds as I hefted it back upright. Next thing I heard was a rap from the office window as two co-workers motioned to ask if I was alright. I gave them the “thumbs up” and scurried home with bruised pride and a little embarrassment. I didn’t even look at the damage, I had to make a left turn out of the parking lot and the signal flasher was working fine so I knew the signal lights were spared. I take the back road home so I stopped at a rural stop sign and leaned over to look at the damage. Meh, not bad, some cosmetic scratches, Trobairitz has no emotional attachment to the bike, nor do I, so it is my winter commuter and it's going to get scratched. I'll blame "the previous owner" but it's going to knock a hundred bucks off the selling price.



It isn’t the first time I’ve dumped a bike and I’m sure it won’t be the last. I dropped my first street bike, a '75 CB750Four in the carport at home. I just came back from a ride and forgot to use the kickstand. I think I strained every muscle in my body trying to pick that old bike up. Several years later I dropped my '84 Honda Magna V45 in a strip mall parking lot. I was in a hurry to drop off a roll of film to be developed and stopped the bike in gear, dropped the kickstand, hit the kill switch and let go of the clutch all in one fluid motion. Evidently I was a little bit faster than the motor and the bike lurched forward off the kickstand and down she went. Another drop came with my '76 KZ900LTD. I just pulled into work, pulled up to a parking spot and I got my boot lace caught in the shifter, seemed like the slowest tip over ever and sat me on my ass. I don’t think any of the previous drops resulted in any serious damage so the scratches in the fairing of the Ninja will be the most expensive repair to date.
It happens to all of us sooner or later and to many of us in the group I ride with. We call it napping; sometimes our bikes just like to take a nap. I just wish they'd let us grab a pillow first.

Thursday, October 8, 2009

Bike Night

Last night was another successful bike night and many of us met new riders and made some new friends.
Yesterday, while advertising bike night, I came across an article in the Portland Motorcycle Travel Examiner about our bike night written by Christopher Brotherton. I thought the kind words and short article were interesting as I have never met Chris nor seen him at any of our gatherings...
Until last night when Trobairitz recognized a young man from his article photo and asked me if that was Chris. I turned to look just missing him as he walked out to the parking lot to snap some more photos.
I didn't think much more of it until we finished up and I headed outside for some fresh air and to check out the bikes in the parking lot. I ran into Chris checking out the bikes, introduced myself, thanked him for joining us and told him how I found his article online. Chris told me he was attending school to become a journalist and flattered he was recognized for his writing, then asked for an "interview".

This morning I received an email of his article:


October 8, 8:13 AM Portland Motorcycle Travel Examiner Christopher Brotherton

Corvallis bike night: New friends and good bikes

There are no games or show and shines. There are no booths to buy a pin or get a patch sewn onto your jacket. However, what there is at the Corvallis Bike Night is camaraderie, as motorcyclists gather at American Dream Pizza for pizza and conversation.
The organizer, known on the forum as Bravura, decided that he would like to throw together a meeting of motorcyclists. He has been arranging these for two years now and not all of them have been overly successful. He says that there are a few times that he has been sitting there all by himself, but the turnout of 20 to 30 people that they had was the norm. The bike night has not always been at American Dream. For a while, Brad had the meeting at Squirrel’s Tavern. He has found that having it at a pizza place makes it a little more family friendly.
Dan and P.J. were both there for the get together, but had never met before. P.J. is a Network Tech for Qwest who rode his Suzuki B King up from Eugene, Ore. for his first ever Bike Night. He was happy that the weather turned out to be as warm and clear as it had for an early Oct. night.
Dan rode his Ducati 750 Supersport to the gathering. Dan is the owner of raresportbikesforsale.com so he was happy to share stories about some of the rare and wonderful bikes that he has had to list on his site lately.
All brands of bikes were on hand as no brand was discriminated against. Hondas, Yamahas, Ducatis, Beemers and even a Norvin (a Norton frame with a Vincent motor shoe-horned into it) were making their presence known in the parking lot.
With this being a non-brand specific gathering, there was no worrying about whether your bike was going to be good enough. This is where a beat up old Yamaha Seca could garner just as much attention as the new Beemer sport bike sitting next to it. Everybody is always welcome, whether you walk, ride or drive there. If you like bikes, this is the group of people that you need to hang out with.


Thanks Chris, and welcome.

Tuesday, October 6, 2009

No more training wheels

Although not a new concept, I thought this a novel invention and immediately wondered how to use this in motorcycle training.



Would eliminating the battery and using centrifugal force overcome the need for a motor and battery? Would this help able-challenged riders ride motorcycles?

Just a thought.

-

Sunday, September 13, 2009

Unpredictable....

...that's what you are,
unpredictable, though near or far....

The predictable driver has become quaintly unpredictable with a simple little electronic device, but in a good way. I wanted to test this little electronic wizardry for a couple of weeks before I wrote about it.

Living in a college town can make for an interesting commute. Imagine 17,000 university students coming back to school after summer vacation, many of them young freshmen new to the area who don't know where they're going. The rest of them think they know where they're going and all of them on cell phones, texting while driving. This doesn't include the numerous high school kids going back to school and how many of just got their license. I know I was one once, but we didn't have cell phones.



So I purchased and installed a headlight modulator from Comagination for my bike.



My intent is to be visible and if I can catch just a glimpse from a texting driver, I am that much safer. I have used the modulator for about three weeks now and I expected people to flash their lights at me, adjust their rear view mirror and point at my headlight as if it were broken. But what is actually happening is hardly that at all, although I've had one driver pull over and another did flash his lights.

You all know that car that comes from the side street, rolls through the stop sign, glances at you and pulls out anyway. The one that could have waited two more seconds, it isn't like there is anyone behind you. Happens all the time, it has come to be expected. You can predict the exact moment when simultaneously they see through you, release the brake and step on the accelerator. It is almost a disappointment when they actually stay still, throwing you off your game. Well this predictable driver has become unpredictable. they roll to the stop and I wait for them to go, they've got plenty of time, you wait for it and they "see" you. The nose of the car dives to a stop, the front wheel doesn't move, you wait for it, make eye contact and they are looking at you, watching you as you pass.

It is a great little device, I can shut off the modulation when riding in a group, turn it on when leading or riding alone and people see me. Although I am still cautious at intersections and side streets, it is nice to know I've a fighting chance against an "intexticated" driver.

Please hang up and drive.



-