Friday, August 19, 2011

What was that?!?


When you hear a pop like a rock hitting your swingarm or panier, pull over and check it out. It might just be something important, but isn't everything on a motorcycle important?

The Triumph shop in Eugene was hosting a group ride to Steamboat Inn for lunch last Sunday so I rode down to join in. I scheduled to meet a new riding buddy Dave and his Bonneville enroute in Monroe and since we had time, I took him down a few backroads to Eugene instead of the long straight boring way. We met another riding friend and regular Saturday Morning Coffee attendee Andy on his black Tiger 955 at the shop. The three of us met with a couple of other riders that we know from previous events and from the shop. We enjoyed conversation over doughnuts and coffee while we waited for more riders to show up.





As motorcyclists the conversation always ends up on the subject of tires and with four of us Tiger riders it was about dualsport tires and Heidenau in particular. I mentioned Cheryl and Leslie's blog and their trip to Alaska on new Tiger 800XCs and on Heidenau K60 Scouts. I mentioned how much I like my Shinko 705s, I find them to be quite capable, trust them in the corners and I can buy a pair for less than one Continental TKC80. I've have 7000 miles on them now so we strolled outside to take a look. We were inspecting them when Andy asked what was going on with my axle. It looked like a piece of wire had wrapped around an axle spacer, hmmm this can't be good and needed closer inspection and a request for confirmation from one of the shop mechanics.





I hefted her up on the center stand while Andy the forklift mechanic and Quentin the shop mechanic poked, prodded, gestured, spun the wheel, gave it a good shake and finally decided that the bearing was still intact and it was just the bearing seal, we'd just keep an eye on it to make sure it was okay. Fortunately it was not an axle bearing but the sprocket carrier bearing. Sweet, I wouldn't have to bail on the ride.

Eventually there were 10 bikes and 11 riders ready to head out. I kept an ear open for any protest from the bearing and we stopped soon enough that I could check on it. It wasn't hot or smoking so we carried on and enjoyed the ride.

We took some backroads that I had never been on before and the route took us to a forest service road that I definitely need to explore some more.

Rod's Demo Tiger 800










The weather was perfect, the road fantastic and we made it Steamboat Inn for lunch.



Not a lot of vegetarian options but they serve breakfast all day so I ordered the potatoes and vegetables with cheese.



It wasn't long before we were out in the parking lot and on our way.






We finished off the ride meandering over and west of the I-5 to Elkton and Drain, the lowest point in Oregon. Fellow riders started peeling off for home and the group got smaller as we got closer and closer to the shop.
Dave, Andy and I thanked Rod for hosting the ride then headed north toward home. Dave stopped for fuel in Junction City and Andy headed north east toward Lebanon as I continued due north to Corvallis.

It was somewhere along the ride when your mind is truly clear that I remembered hearing that pop earlier in the week and thinking the lid to my panier had opened or a rock had hit the swingarm. The bike never developed a vibration or squealing noise and I was running late so by the time I made it to work I had forgotten all about it. I'll bet that's what it was, my bearing had failed.

So after a quick calculation from the time I heard the pop and week of commuting, attending bike nights and Sunday's ride, I rode 600 miles on a failed bearing. Luckily I made it home safely and inspected the bearing a bit closer.


Oh boy, this doesn't look good.


Hmmm, wonder what this is going to cost me?






It looks worse than it was. I cleaned up all the parts, referred to Bike Bandit's schematic, took inventory and only needed to replace the bearing and I replaced all three to be safe.



The hard part was removing the old bearing races from the sprocket hub and the spacer. I managed to get the inner race from the spacer with an angle grinder but I didn't have any way to get the outer race from the hub as my hammer and screwdriver wasn't going to do it.

Andy told me to bring the hub into work and the next morning he was waiting for me in his service van ready to help. With a threat from the die grinder and a little persuasion with the 32oz. ball-peen he got the outer race to see things his way.




It took four days to source the bearings and oil seals locally but she's back together and happy. Now to replace the front ones too... maybe tomorrow.


-

Wednesday, August 10, 2011

My Tent and Billy


Since our adventure down to Wolf Creek, scouting camping sites along the way and missing out on the OBDR I've been wanting to go camping on the bikes. I had all the equipment, just hadn't had the opportunity to put it to use.

While at bike night last week a friend mentioned he had been up to Crater Lake on his bike. The road around the rim had just opened a week or two ago and I had been meaning to get up there since last year. I pulled out the maps, found some campgrounds, loaded up the bikes and last Saturday we were off. I hate making reservations at campgrounds or even hotels for that matter, it puts a sense of urgency and obligation on the trip. You pay a deposit then you have to be there by a certain time or you lose the site/room and it just takes all the spontaneity, fun and adventure out of the trip. I knew there were plenty of campgrounds along the route and we were self sufficient so worst case scenario would be to pull off into the woods and set up camp for the night without a fire.

We left Saturday morning coffee, rode down Peoria Road, Harrisburg over McKenzie View and over to Lowell and up highway 58 to Oakridge where we stopped for a bite to eat and part ways with Andy as he went off to find gravel roads and parts unknown. Trobairitz and I continued on over the Willamette Pass down Hwy 97 into Chemult for something cold to drink before heading off into the woods.



We could have rode down to Klamath Falls and found a hotel too if need be but we found a perfect site at the first campground we pulled into, Farewell Bend Campground off highway 230 just north of Union Creek. Stopping to look at the campground map and avoiding the playground area we eyed a site off at the end of a loop along the river. We couldn't believe it was available and quickly claimed it by parking our bikes and walking up to the camp host site to pay before setting up the tent, starting a fire and making dinner.



A nice little plateau for the tent with a river view.





Of course my billy is the latest in camp technology and worth every cent. I love this thing, it boils water in just a couple minutes and makes one hell of a blow torch to start a campfire.



Sunday morning we were up early, put some hot oatmeal in us for breakfast and went for a walk down the trail to Rogue Gorge.









Then it was off to ride the rim.











We had a great weekend, fantastic weather and an even better ride. Now we can't wait to plan our next camping trip.


-